Description: The kit contains the required parts for repair of the upper and lower door hinges to regain the original structural integrity. The advantage to this kit is that you do not have to remove the old hinges or adjust door alignment. All you need to do is remove the old worn pins and bushings and install the kit (typically no more than a two hour job). Each kit will repair one ThirdGen (1982-92) Camaro or Firebird (F-Body) door.  The hinge pins in this kit have a Zerk fitting to attach a grease gun and grease the interface between hinge pin and bushing. 

Kit Contents: (2) CNC machined 1045 steel pins, electroless nickel plated for improved lubricity and corrosion protection. The pins have grease nipples and grease fitting covers, (2) CNC Machined brass flanged bushings, (2) Aerospace 12 point high tensile nuts, 0.5ml tube of Loctite 263 threadlocker adhesive, 6" strip of special abrasive, lower hinge pin and bushings, instructions.

Recommended Tooling:

TDS 300350 EZ-Store Door Alignment Tool

TDS 301120 GM Door Hinge Spring Tool helps to remove or install the lower door hinge spring

TDS 303120 5 Pc. Long Pin-Punch Set helps to push out the upper hinge pins once you've ground off the heads

TDS 502270 Door hinge "Pin Popper" helps to drive out the lower hinge pin

TDS 604040 Bushing tool helps to remove the old lower bushings and align and install the new ones.