Description: The kit contains the required parts for repair of the upper door and lower hinges to regain the original structural integrity. The advantage to this kit is that you do not have to remove the old hinges, or adjust door alignment. All you need to do is remove the old worn pins and bushings and install the kit (typically no more than a two hour job). Each kit will repair one Third Gen (1982-92) F-Body door. These same kits will repair the upper and lower hinges of 1993-2002 F-Body. Two kits are required to repair the upper and lower hinges of a 4th Gen F-Body door.

Kit Contents: (2) CNC machined 1045 steel pins, electroless nickel plated for improved lubricity and corrosion protection. (2) CNC machined brass flanged bushings, (2) Aerospace 12 point high tensile nuts, 0.5ml packet of Loctite 263 threadlocker adhesive, 6" strip of special abrasive, lower hinge pin and bushings, instructions..

Recommended Tooling:

TDS 300350 EZ-Store Door Alignment Tool

TDS 301120 GM Door Hinge Spring Tool. The tool helps to remove or install the lower door hinge spring

TDS 303120 5 Pc. Long Pin-Punch Set. This tool helps to push out the upper hinge pins once you've ground off the heads

TDS 502270 Door hinge "Pin Popper" helps to drive out the lower hinge pin

TDS 604040 Bushing Tool helps to remove the old lower bushings and align and install the new ones.